Skip to content

Watch Winder TPD Parameters

How to Wind an Aragon Watch?

by SheldonLong 01 Dec 2022 0 Comments

How to Wind an Aragon Watch?

 

About Aragon
Aragon Manual Winding Steps
Aragon Watch the Winder Setting
Recommended Watch Winder
In Conclusion

About Aragon

Wing Liang founded the company in 1991, a relatively new watchmaking company founded with the vision of making watches that would satisfy all user preferences at an affordable price tag. His mission is to create watches that meet elements of aesthetics and accessibility.

Wing Liang, Chief Designer and CEO of ARAGON, has always been eager to meet the expectations of watch lovers. Has a unique talent for crafting visually and aesthetically stunning timepieces.

Why Manual Winding for Aragon Watches?

The most common reason for Aragon watches to be hand wound is so that you can set the time accurately with it, this saves you from having to reset the watch as often, it also means that the watch will always be accurate and reliable.
Winding a watch is a complex endeavor, but for many watch lovers, it is one of the joys of interacting with a watch.

Aragon Watch Manual Winding Steps

- Locate the crown which is usually on the right side of the dial.
- Gently pull the crown away from the dial to its original position, being careful not to pull it too far.
- Begin winding the crown clockwise until resistance is felt, or 25-30 revolutions at a time.
- Push the crown back into its normal position.
- Pull the crown out again and turn the crown to set hands until the hands show the current time and date.
- Push it back again when done.

Automatic watches should not be overwound. Automatic watches or self-winding watches depend on the movement of your arm to operate.For manual winding, the process is simple and you will find that winding your Aragon gives you a few minutes of peace every day!

Aragon Watch the Winder Setting

Most Aragon watch automatic movements can be wound properly with most watch winder boxes. Usually, Aragon's self-winding movement needs to rotate 650-950 revolutions per day, and most of them can be wound clockwise.

Below are some of the most popular Aragon models and their winding settings.

Definitions:

《CW》 - Clockwise winding direction;
《CCW》 - Counterclockwise winding direction;
《Both》 - Combined mode (Clockwise + Counterclockwise);
《–》 - Undefined;Definitions:

MODEL, DESCRIPTION MOVEMENT / CALIBER WINDING DIRECTION TURNS PER DAY (TPD)
Armor 15 Automatic Miyota 8215 CCW 650-950
Armor 15 Skeleton Miyota 8N24 CCW 650-950
Bubble Automatic Miyota 8215 CCW 650-950
Concept T Skeleton Miyota 8N24 CCW 650-950
Divemaster Enforcer Valjoux 7750 CW 800
Horizon Skeleton Miyota 8N24 CCW 650-950
Mega Cocoon Automatic Miyota 8205 CCW 650-950
Monte Carlo Swiss Chrono Automatic Valjoux 7750 CW 800
Mystique Skeleton Miyota 8N24 CCW 650-950
Ninja Swiss Automatic ETA 2836 Both 650
Octopus Automatic Miyota 8205 CCW 650-950
Mystique Diamond Skeleton Miyota 8N24 CCW 650-950
Raptor Automatic Android 3809
Redline Automatic Miyota 8215 CCW 650-950
Savant Automatic Miyota 8215 CCW 650-950
Savant Skeleton Miyota 8N24 CCW 650-950
Spectrum Automatic Miyota 8215 CCW 650-950
Sphere Automatic Miyota 8205 CCW 650-950
Stealth Swiss Automatic
Twin Automatic Miyota 6T51 CCW 650-950
V Skeleton Automatic Tungsten Open Heart Miyota 8250 CCW 650-950
Virtuoso Diamond Swiss ETA 2824 Both 650
Virtuoso Swiss Automatic ETA 2824 Both 650
Virtuoso Swiss Skeleton ETA 2824 Both 650
Volcano Automatic Miyota 8215 CCW 650-950

If you cannot find your watch model (or movement) in this watch, you can try to determine your Aragon winding mode. You should choose the combined winding mode (CW+CCW) and minimum turns per day (TPD). Then put your watch into the watch winder and check the accuracy of your watch display time after a few days. If you run behind, you need to increase the number of TPD by one level.

Aragon Watch Time Adjustment Method

Set Time:

1) Unscrew the crown, pull it out to the third gear, and adjust to the correct time display.
2) Push the crown back to the first position for normal operation. Unscrew the crown to secure.

Set the Day of the Week:

1) Unscrew the crown, pull out to position 2, and adjust until the correct day of the week is displayed. Turn the crown in opposite direction to set the date.
2) Push the crown back to the first position for normal operation. Unscrew the crown to secure.

Set Date:

1) Unscrew the crown, pull out to position 2 and adjust to display the correct date. Twist the crown on the opposite side
Sets the direction of the date.
2) Push the crown back to the first position for normal operation. Unscrew the crown to secure.

Mechanical watches must be wound every day to ensure accurate timekeeping. Avoid setting days/dates between 9 pm. The 3 AM time is most sensitive to wheels and gears.

Can I Always Wind my Watch Manually With the Crown?

It’s okay to do this once in a while, but not too often—especially if your watch has a screw-down crown.
Firstly, with crown winding, the gears and other parts of an automatic movement will wear out faster, as will the screw-in crown system, as it is not designed for frequent use. Self-winding watches should be worn for at least eight hours a day to make the most of their power reserves, so rather than letting your automatic watch's power reserve drain, invest in a simple automatic watch winder.

What Watch Winder is Suitable for the Aragon?

There is no doubt that a high-end watch needs a fine watch winder. Here are 2 highly-rated watch winders that we recommend.

MOZSLY® Double Watch Winder -Orange Leather  

double watch winder box-blog

  • Material: wooden box/PU leather/acrylic board
  • Color: Orange/Black/Brown/Carbon Fiber
  • Size: 8.8*5.9*4.7 inches
  • 4 modes with TPD settings ranging from 650 to 1500
  • All three winding directions are supported
  • Antimagnetization
  • Use Japanese upgraded Mabuchi Motor
  • Dual power
  • 3 Years Warranty

This watch features a unique orange winding with a multi-layer paint process for a more beautiful, shiny, and smooth finish. Inside, the leather and wood grain look sleek and luxurious. looks great.

MOZSLY® Single Watch Winder - Black Leather

single black watch winder box

  • Material: wooden box/PU leather/acrylic board
  • Color: Black
  • Dimensions: 4.4 x 6 x 4.4 inches
  • 4 modes with TPD settings ranging from 650 to 1500
  • All three winding directions are supported
  • Antimagnetization
  • Use Japanese upgraded Mabuchi Motor
  • Dual power
  • 3 years warranty

    This watch winder is as simple and understated as Aragon's other classic black watches. If you're a watch collector who wants your watch to look elegant and unobtrusive, this black watch winder is perfect for you. This will help improve the look of your expensive watch without being overly ostentatious.

    MOZSLY watch winders use high-quality upgraded Japanese Mabuchi motors, a well-known brand that manufactures precision motors. These motors keep the noise below 10 decibels, so even if you put it in your bedroom, it will give you a very quiet experience. The internal motor is closed and can be separated from the watch so that the watch will not be magnetized and affect the travel time. With a 36-month warranty and friendly customer service, we welcome you to purchase our watch winders.

    In Conclusion

    Storing a Aragon watch in a watch winder to wind it keeps the watch's mechanical gears lubricated, extending the life of the watch and keeping it working properly.

    Prev Post
    Next Post

    Leave a comment

    Please note, comments need to be approved before they are published.

    Thanks for subscribing!

    This email has been registered!

    Shop the look

    Choose Options

    Close
    Edit Option
    Close
    Back In Stock Notification
    this is just a warning
    Login Close
    Close
    Shopping Cart
    0 items